
WeldTech - 75 Instruction Manual
SIMTECH
Phone: 877-777-2467 • Fax: 215-547-9129
www.SimtechUSA.com
13
1.070714
No. Denomination Function
12 Control lamp red • There are 3 different states:
• off: signal showing that the heating element is
not heated up at the moment or that it is cooling.
• blinking: the heating element temperature is
maintained by a pulse-position ratio.
• on: signal showing that the heating element is
heated up at the moment. The nominal
temperature is not yet reached.
13 Control cnob • Setting the temperature of the heating element
14 Switch on/off • Lightens as soon as the heating element is switched on
15 Cylinder head screw M6x35 • Releasing the attachement of the heating element
16 Cylinder head screw M4x20 • Radial adjustment of the heating element
4.2 Elements at the back
Comentarios a estos manuales