
WeldTech - MaxiPlast Instruction Manual
SIMTECH
Phone: 877-777-2467 • Fax: 215-547-3410
www.SimtechUSA.com
15
1.031213
4.2 Elements of the Heating Element
No. Denomination Function
1 Switch on / off with lamp
- comes on as soon as the heating element has been
connected to he aggregate and the switch has been switched
“on“.
2 control knob with slot - setting temperature at heating element
3 control lamp green - there are three statuses:
out: If the desired temperature is lower
than the actual temperature the heating
heating element cools-down to the desired
temperature.
blinking: The adjusted temperature is maintained.
on: The heating element is heated up because
it has not reached the desired temperature.
Comentarios a estos manuales